3/1, Ashutosh Mukherjee Road, Belurmath Howrah-711202, West Bengal, India
SHOWER TYPE HEATING TORCH
1. It’s a Shower Type Heating Blowpipe (1Mt.Long). 2. Gas – Oxy /Fuel gas. 3. Working Pressure -2.5 kgf /cm2. 4. Resistance to Backfire. 5. Economy of Gas saving. 6. ISI approved IS 7653:1975.
*Caution : Do not use acetylene as fuel gas .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
WELDING BLOWPIPES (TORCH) Model BLOWFIRE
1. It’s a Welding Blowpipe. 2. Working Pressure – 2.5 kgf / cm2 (Max.). 3. Resistance to Backfire. 4. Economy of Gas saving. 5. ISI approved IS 7653:1975.
Flash Back Arrestor (Regulator & Torch)
1. Flash back Arrestor is a device to eliminate every possibility of explosion or fire caused by flashback. 2. Flash back Arrestor is suitable for fitting on the Regulator Torch Outlet. 3. Oxygen for Use at a maximum inlet pressure 10bar (150 psi). 4. Fuel Gas : Acetylene / Propen / LPG at a max. inlet pressure of 8bar (43 psi). 5. Conform to IS 11006 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Welding Accessories
1. Leather Gauntlets (Hand Gloves) generally worn by Welders for protection against heat and abrasion during welding.
2. Standard sizes (total length) are 300 mm(12″), 350 mm(14″) & 400 mm(16″) .
3.Others sizes available on demand.
4. ISI approved IS 2573.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Model-Hind
1.It’s a Injector Type Versatile Cutting Machine. 2. Capable to Cuts any length straight line, square or bevel edge & circle. 3. Resistance to Backfire. 4. Conform to IS 7653.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Model Panther
1. It is a Injector Type Versatile Cutting Machine. 2. Capable to Cuts any length straight line, square Cuts (upto 150mm thick MS), bevel cuts (upto 45°and 100mm thick MS) & circle cuts (150-1375 mm diameter). 3. Cutting Speed – 120-400mm/min, Speed Control – Resistant Control. 4. Gas Hose Connection – 3/8″BSP RH & LH .5. Conform to IS 7653 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Model-STAG NM
1. It’s a Nozzle Mixing Type Cutting Machine. 2. Capable to Cuts any length straight line, square Cuts (upto 100mm thick MS), bevel cuts (upto 45°and 75mm thick MS) & circle cuts (75-1140mm diameter). 3. Cutting Speed – 190-830mm/min, Speed Control – Resistant Control. 4. Gas Hose Connection – 1/4″BSP RH & LH .5. Resistance to Backfire. 6. Economy of Gas saving .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Straight & Cutting Machine ( Model-STAG )
1.It’s a Injector Type Versatile Cutting Machine. 2. Capable to Cuts any length straight line, Thickness cuts (upto 75mm thick MS), bevel cuts(upto 45°and 50mm thick MS) & circle cuts(75-1140mm diameter). 3. Cutting Speed – 200-800mm/min, Speed Control-Resistant Control. 4. Gas Hose Connection-1/4″BSP RH & LH . 5. Resistance to Backfire. 6. ISI approved IS 7653:1975 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Specially Engineered Regulators for ultra – high purity gases ( Model : RSG- 43 Series )
The RSG- 43 Series regulators are the latest in a long line of superdb gas control equipment manufacture with international standard. These latest design changes and proven diffusion- resistant material exact requirements of services for specialty gases and provide the user with almost safety, Durability & precision prone components in their regulators not only wastage but may also distort the analytical results.
Specification:1.Constructed from Non-Contaminating materials. 2.Body made of Austenitic Stainless Steel-AISI- 304/316 grade. 3.Teflon seal. 4.Teflon –lined stainless steel diaphragm. 5.Pressure Gauge – Stainless steel with SS bourdon tube. 6.For use with variety of gases – Ammonia, Argon, Helium, Hydrogen, Nitrogen, Nitrousoxide, Oxygen, Sulphur dioxide and rare gases like Neon, Krypton and Xenon, Arsine, Carbon monoxide, Carbonyl sulphide, Methylene and many others gases.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Carbon dioxide gas pre-heater
Feature:
Gas pre-heater is used for heating the CO gas to the boiling point, before it enters into the Regulator.
Heater is so designed to sufficient cooling the heater during the cylinder valve and integrate in piping system.
It is thermostat resistant control which maintain constant temperature of 60°+3°C .
Depth-63mm,Width-62mm, Height-62mm, Net Weight-460gms (approx).
Thermo-Resistant Control .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Cutting Nozzles
1. A Type & ANME – (for Acetylene gas) . 2. B Type & PNME (for LPG gas) . 3. Nozzles sizes : 1/32″ , 3/64″ , 1/16″, 5/64″, 3/32″, 7/64”, & 1/8” . 4. Cutting Thickness (MS) : 6 to 300 mm . 5. ISI approved IS 7653: 1975 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Electrode Holder (ARC Welding Accessories)
Features:
1. Type-A is fully insulated, suitable adverse welding conditions .
2. Type-B is semi insulated for general open shop conditions.
3. Rated Current : 200, 400 and 600 Amps.
4. Conform to IS 2641.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Flow Meter ( Argon/co2 )
Features:
1. Flow meter used with regulator or pipeline distribution installation. 2. Precision machined forged brass body. 3. Depth-30mm,width-100mm, Height-150mm, Weight-210gm (approx). 4. Range : 2- 40 lit/m, Gas pressure-0.2 Mpa (max). 5. Connection : Outlet-3/8″ BSP(M), Inlet-3/8″BSP(F).
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Gouging Torches ( Model GT- 6, GT- 9, GT- 12, GT- 15 & GT- 20 )
Features :
1. Gouging Torches are used to Gouge, Crompter, Grove cut, Bevel, Flash of various metals like Aluminum, Copper, Brass, Steel & Cast Iron.
2. For high conductivity of current, special grade copper / copper alloy used.
3. Heat resistant insulators.
4. 360 free revolving movement between torch and mono cable.
5. Uses compressed air between 5.6 and 7.0 kg./cm2 (80 and 100psi).
6. Standard Length of cable is 2 mt. long (additional length available on demand).
7. Weight of Torch 2.6 kg. (approx).
8. 600Amps, 900Amps, 1200Amps, 1500Amps, 2000Amps.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
MIG /MAG Welding Torch Gas Cooled ( Mig / Mag Welding Torch 250G, 350G & 400G gas cooled )
Feature
1. The Torch cooling process through gas.
2. The Shielding gas is inert, the welding process is known as MIG process.
3. The gas has a definite chemical process activity at the high temperature of the electric arc is known as MAG process.
4. The Torch use as continuous welding process, need not required changing electrode frequently.
5. Conform to IS 7931 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
TIG Welding Torch ( HMP Water Cooled / Gas Cooled 400 Amp & 600 Amp )
Feature
1. The Torch cooling process through water. 2. It is a continuous welding process, need not required changing electrode frequently. 3. Conform to IS 7931 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours
Feature:
Gas pre-heater is used for heating the CO gas to the boiling point, before it enters into the Regulator.
Heater is so designed to sufficient cooling the heater during the cylinder valve and integrate in piping system.
It is thermostat resistant control which maintain constant temperature of 60°+3°C .
Depth-63mm,Width-62mm, Height-62mm, Net Weight-460gms (approx).
Thermo-Resistant Control .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. A Type & ANME – (for Acetylene gas) . 2. B Type & PNME (for LPG gas) . 3. Nozzles sizes : 1/32″ , 3/64″ , 1/16″, 5/64″, 3/32″, 7/64”, & 1/8” . 4. Cutting Thickness (MS) : 6 to 300 mm . 5. ISI approved IS 7653: 1975 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
These Electrode Drying Ovens are mainly used for drying electrodes and ensures longer life of electrode, especially suitable for re-drying the electrode having excess moisture than the constant capacity of the flux of electrode. Our electrode ovens are extremely convenient to shift from one place to another.
Specification:
1. Capacity available : 25 kgs .
2. Model- TH 1 .
3. Storage space : 305mm x 305mm x 483mm.
4. Digital display temperature controller with relay system .
5. Temperature range upto 300°C.
6. Input voltage: 220 V / 230 V AC .
7. Rating: 1200 watts. 8.Current : 5.5 amps
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1.Capacity available : 50 kgs. 2. Model- TH 1. 3. Storage space : 559mm x 559mm x 483mm .4.Digital display temperature controller, with relay system .5. Temperature range upto 400°C. 6. Input voltage: 220 V / 230 V AC. 7. Rating: 1600 watts.8. Current : 7.0 amps.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Features:
1. Type-A is fully insulated, suitable adverse welding conditions .
2. Type-B is semi insulated for general open shop conditions.
3. Rated Current : 200, 400 and 600 Amps.
4. Conform to IS 2641.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. Flash back Arrestor is a device to eliminate every possibility of explosion or fire caused by flashback. 2. Flash back Arrestor is suitable for fitting on the Regulator Torch Outlet. 3. Oxygen for Use at a maximum inlet pressure 10bar (150 psi). 4. Fuel Gas : Acetylene / Propen / LPG at a max. inlet pressure of 8bar (43 psi). 5. Conform to IS 11006 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Features:
1. Flow meter used with regulator or pipeline distribution installation. 2. Precision machined forged brass body. 3. Depth-30mm,width-100mm, Height-150mm, Weight-210gm (approx). 4. Range : 2- 40 lit/m, Gas pressure-0.2 Mpa (max). 5. Connection : Outlet-3/8″ BSP(M), Inlet-3/8″BSP(F).
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Features :
1. Gouging Torches are used to Gouge, Crompter, Grove cut, Bevel, Flash of various metals like Aluminum, Copper, Brass, Steel & Cast Iron.
2. For high conductivity of current, special grade copper / copper alloy used.
3. Heat resistant insulators.
4. 360 free revolving movement between torch and mono cable.
5. Uses compressed air between 5.6 and 7.0 kg./cm2 (80 and 100psi).
6. Standard Length of cable is 2 mt. long (additional length available on demand).
7. Weight of Torch 2.6 kg. (approx).
8. 600Amps, 900Amps, 1200Amps, 1500Amps, 2000Amps.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. Double Stage Regulator. 2. Brass forging body. 3. Inlet Pressure Gauge 0-300 bar (FSD). 4. Intel Pressure 0-200 bar. 5. Outlet Pressure Gauge 0-16 bar (FSD). 6. Outlet Pressure 0-10 bar (Max). 7. Intel Connection : 5/8”BSP(R/H)M. 8. Outlet Connection : 3/8”BSP(R/H)M. 9. Flow -60m3/h (1000lit/min). 10. Use for Welding, Cutting, Heating & Brazing purpose. 11. ISI approved. IS 6901: 2009.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. Double Stage Regulator. 2. Brass forging body. 3. Inlet Pressure Gauge 0-300 bar (FSD) . 4. Intel Pressure 0-230 bar. 5. Outlet Pressure Gauge 0-16 bar (FSD). 6. Outlet Pressure 0-12 bar (Max). 7. Intel Connection : 5/8”BSP(R/H)M. 8. Outlet Connection : 3/8”BSP(R/H)M. 9. Flow -70m3/h (1200lit/min). 10. Use for Welding, Cutting, Heating & Brazing purpose. 11. ISI approved. IS 6901: 2009.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. Single Stage Regulator . 2. Brass forging body. 3. Inlet Pressure Gauge 0-300 bar (FSD) . 4. Intel Pressure 0-200 bar. 5. Outlet Pressure Gauge 0-16 bar (FSD). 6. Outlet Pressure 0-8 bar (Max). 7. Intel Connection : 5/8”BSP(R/H)M. 8. Outlet Connection : 3/8”BSP(R/H)M. 9. Flow -55m3/h (900lit/min). 10. Use for Welding, Cutting, Heating & Brazing purpose. 11. ISI approved. IS 6901: 2009.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. Single Stage Regulator. 2. Brass forging body. 3. Inlet Pressure Gauge 0-300 bar (FSD) . 4. Intel Pressure 0-200 bar. 5. Outlet Pressure 0-8 bar (Max). 6. Intel Connection : 5/8”BSP(R/H)M. 7. Outlet Connection : 3/8”BSP(R/H)M. 8. Flow -45m3/h (750lit/min).. 9. Use for low thickness Welding purpose. 10. ISI approved. IS 6901: 2009.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. Single Stage Regulator. 2. Inlet Pressure Gauge 0-300 bar (FSD) . 3. Intel Pressure 0-200 bar (Max). 4. Outlet Pressure Gauge 0-16 bar (FSD). 5. Outlet Pressure 0-14 bar (Max). 6. Intel Connection : 5/8”BSP(R/H)M. 7. Outlet Connection : 3/8”BSP(R/H)M. 8. Flow -85m3/h (1400lit/min). 9. Use for Heavy duty Cutting Machine & Manifold. 10. ISI approved. IS 6901: 2009.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Feature
1. The Torch cooling process through gas.
2. The Shielding gas is inert, the welding process is known as MIG process.
3. The gas has a definite chemical process activity at the high temperature of the electric arc is known as MAG process.
4. The Torch use as continuous welding process, need not required changing electrode frequently.
5. Conform to IS 7931 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1.It’s a Injector Type Versatile Cutting Machine. 2. Capable to Cuts any length straight line, square or bevel edge & circle. 3. Resistance to Backfire. 4. Conform to IS 7653.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. It is a Injector Type Versatile Cutting Machine. 2. Capable to Cuts any length straight line, square Cuts (upto 150mm thick MS), bevel cuts (upto 45°and 100mm thick MS) & circle cuts (150-1375 mm diameter). 3. Cutting Speed – 120-400mm/min, Speed Control – Resistant Control. 4. Gas Hose Connection – 3/8″BSP RH & LH .5. Conform to IS 7653 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1.It’s a Low Pressure Cutting Blowpipe. 2.Gas Mixing : Injector Type Mixer. 3.Working Pressure – 2.5 kgf /cm2 to 4.0 kgf /cm2. 4.2 Seat Nozzle. 5.Resistance to Backfire. 6.ISI approved IS 7653:1975.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. It’s a Heavy Duty Cutting Blowpipe. 2. Gas Mixing: Nozzle Mixing Type. 3. Working Pressure – 2.5 kgf/cm2 to 5.0 kgf / cm2. 4. 3 Seat Nozzle. 5. Resistance to Backfire. 6. Economy of Gas saving. 7. ISI approved IS 7653:1975.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. It’s a Nozzle Mixing Type Cutting Machine. 2. Capable to Cuts any length straight line, square Cuts (upto 100mm thick MS), bevel cuts (upto 45°and 75mm thick MS) & circle cuts (75-1140mm diameter). 3. Cutting Speed – 190-830mm/min, Speed Control – Resistant Control. 4. Gas Hose Connection – 1/4″BSP RH & LH .5. Resistance to Backfire. 6. Economy of Gas saving .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. It’s a Shower Type Heating Blowpipe (1Mt.Long). 2. Gas – Oxy /Fuel gas. 3. Working Pressure -2.5 kgf /cm2. 4. Resistance to Backfire. 5. Economy of Gas saving. 6. ISI approved IS 7653:1975.
*Caution : Do not use acetylene as fuel gas .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
The RSG- 43 Series regulators are the latest in a long line of superdb gas control equipment manufacture with international standard. These latest design changes and proven diffusion- resistant material exact requirements of services for specialty gases and provide the user with almost safety, Durability & precision prone components in their regulators not only wastage but may also distort the analytical results.
Specification:1.Constructed from Non-Contaminating materials. 2.Body made of Austenitic Stainless Steel-AISI- 304/316 grade. 3.Teflon seal. 4.Teflon –lined stainless steel diaphragm. 5.Pressure Gauge – Stainless steel with SS bourdon tube. 6.For use with variety of gases – Ammonia, Argon, Helium, Hydrogen, Nitrogen, Nitrousoxide, Oxygen, Sulphur dioxide and rare gases like Neon, Krypton and Xenon, Arsine, Carbon monoxide, Carbonyl sulphide, Methylene and many others gases.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1.It’s a Injector Type Versatile Cutting Machine. 2. Capable to Cuts any length straight line, Thickness cuts (upto 75mm thick MS), bevel cuts(upto 45°and 50mm thick MS) & circle cuts(75-1140mm diameter). 3. Cutting Speed – 200-800mm/min, Speed Control-Resistant Control. 4. Gas Hose Connection-1/4″BSP RH & LH . 5. Resistance to Backfire. 6. ISI approved IS 7653:1975 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Our Thermocut Carry Oven (Round type, Square type & Mini) are highly durable & energy efficient. Ovens are light and easy to carry. Stick electrodes are protect during transfer from the holding oven to the workplace. The Thermocut Carry Ovens are fabricated using superior quality raw material and meet standard quality norms.
Specification
1.Capacity available : 5 kgs .
2. Model- TH 2 .
3.Inner Space : 63 mm x 483 mm..
4. Small in size, easily carried to shop floor.
5. Oven can carry 18″ rods.
6. Temperature (Thermostat type) range upto 50°C to 300°C.
7. Rating : 300 watts.
8. Input voltage: 220 / 230 V AC.9. Current : 1.5 amps.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Specification:
1. Capacity available : 5 kgs .2. Model- TH 2 DC (Square Type).3. Inner Space : 63 mm x 63 mm x 483 mm . 4. Small in size, easily carried to shop floor. 5. Oven can carry 18″ rods. 6. Temperature range upto 150°C. 7. Rating : 170 watts. 8. Input voltage: 80 V DC . 9. Current : 2.0 amps.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1.Capacity available : 10 kgs .2. Model- TH 2 (Mini) . 3. Inner Space : 203 mm x 203mm x 483 mm. Small in size, easily carried to shop floor. 4. Oven can carry 18″ rods. 5. Temperature (Thermostat type) range upto 50°C to 300°C. 6. Input voltage: 220 / 230 V AC .7. Rating : 600 watts. 8. Current : 3.0 amps
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
Feature
1. The Torch cooling process through water. 2. It is a continuous welding process, need not required changing electrode frequently. 3. Conform to IS 7931 .
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours
1. Leather Gauntlets (Hand Gloves) generally worn by Welders for protection against heat and abrasion during welding.
2. Standard sizes (total length) are 300 mm(12″), 350 mm(14″) & 400 mm(16″) .
3.Others sizes available on demand.
4. ISI approved IS 2573.
We appreciate your continued support and look forward to serving you. HMP brand is the professional’s choice ! We confident it will always be yours.
1. It’s a Welding Blowpipe. 2. Working Pressure – 2.5 kgf / cm2 (Max.). 3. Resistance to Backfire. 4. Economy of Gas saving. 5. ISI approved IS 7653:1975.
3/1, Ashutosh Mukherjee Road, Belurmath Howrah-711202, West Bengal, India
+91-33-2654 8185
info@hmpproduct.com
Collaboratively deliver partnerships progressive alignments. Assertively premier supply chains before emerging solutions. Monetize high-payoff action items before wireless internal or “organic” sources exceptional action items.
